Publicité
Les langues disponibles
Les langues disponibles
Instruction manual
5000B: Professional Monitoring Headphones
This semi-open studio headset is designed for demanding listening applications and for high
precision monitoring work. Especially created for professional musicians, it's ideal for broadcast,
for work in studio or home-studio. Good noise isolation and a really comfortable listen.
Technical data
• Type : semi open
• Loudhailer: Ø 50mm
• Impédance : 32 Ω
• Sensibility : 94dB ±3dB
• Frequency Response : 15Hz-28kHz
• Max. Power : 1200mW
• Cable : about 3 meters
• Plug : Jack 3.5mm + adaptateur 6.3mm
• Supplied with x2 straight detachable cables (1,5 M and 3 M) + Case + x2 Extra Ear Pads
(velvet and rubber)
Instructions for use
1. Put the headphones on and adjust the headband
2. Do not cover the transducers
3. The ear cushions have to be replaced from time to time for reasons of hygiene.
Warning
Hearing Damage
Avoid using headphones with the volume turned up for an extended period of time. Doing so can
damage your hearing. It is advisable to keep the volume at a moderate level at all times.
Cleaning the headphones
To clean the headphones, use a soft damp cloth. If necessary, the headphones can be cleaned with
soapy water (use a mild detergent such as washing-up liquid).
Never use detergents containing solvents.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2019 IPE Music/Prodipe
Page 6
Publicité
