Introduction; Purpose Of The User Manual And Maintenance; User's Profile - Reverberi KIARA-TEC Manuel D'utilisation Et Entretien

1 INTRODUCTION

We thank you for choosing a REVERBERI machine.
The User and Maintenance Manual (U.M.M.) has been realized in order to provide general knowledge of the machine
and to give the transport, use and maintenance instructions and all the necessary details for the installation, for the correct use
and for the proper functioning.
We ask you kindly to CAREFULLY readthe manual BEFORE CARRYING OUT ANY OPERATION ON THE
MACHINE.
In caseyou need another copy of the Use and Maintenance Manual (U.M.M.) you are invited to forward your motivated
request to the CONSTRUCTOR, quoting the serial number on the title of this post or on the name plate on the back of the
machine.

1.0 PURPOSE OF THE USER MANUAL AND MAINTENANCE

The following Manual aims to provide user all the information about Kiara-Tec in order to warrant:
 the correct installation
 the optimal use.
 a safe and reliable functioning.

the requirements for proper and regular maintenance and for the periodic replacement operations of the
components.

1.1 USER'S PROFILE

The user, who has the responsibility for operation of the equipment, must be a person previously well trained by
the Employer (or whoever takes his place), that person must MANDATORY read/UNDERSTAND all the
instructions in this U.M.M.
The manufacturer is not liable for any direct or indirect damages caused by people who had
used the device without having received adequate instruction and relevant qualifications to
conduct the same and consequently have made bad use.
Three kinds of profiles can use the Kiara-Tec and have to read carefully this Manual:
The Administrator
The administrator is the responsible for the clinic or doctor's office, or rather the person responsible for the protocol
of hygiene and washing process. The administrator is also responsible for the OPERATORS' training and for the
proper operation and maintenance of the equipment. Must have adequate training for all operations to be
performed and for safe use.
The Operators
The operators are those who use the Kiara-Tec according to the instructions received from the ADMINISTRATOR.
Enabled technicians
All the ordinary and extraordinary maintenance, qualified, controls, cleanings and registrations should be
performed only by authorized personnel and/or instructed to do so and when the equipment is not working (state of
zero energy).
KIARA-TEC /manuale di istruzioni-IT/ Rev.02/08.07.14
20