Making Connections - LDLC Pro Touch 21.5 Guide D'utilisation

MAKING CONNECTIONS

Turn off your computer before performing the procedure below.
1. Connect one end of the cable (DP/VGA/HDMI) to the back of the monitor and
connect the other end to the computer's associated port.
(When several cables are connected, use the OSD menu to select the desired
input source).
2. Connect the audio cable between the monitor's audio input and the PC's audio
output (green port).
3. Touch function: connect the adapted end of the included USB cable to the USB port
located at the rear of the screen, and the other end to the computer's USB port.
4. Plug one end of the 12V DC adapter to the LCD monitor's DC input socket, plug
one end of the AC power cord to the 12V DC adapter AC input socket, and the
other end of the AC power cord to Wall outlet.
5. Turn on your monitor and computer.