Numatic TTB-1620/100T Mode D'emploi page 17

!
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents of the start up pack (Fig 1).
Contents
1
2
Lift top tank assembly to reveal battery compartment, ensuring you use the handle grip
provided (Fig 1).
Fit battery fuse (contained in start-up pack) into the battery fuse holders as illustrated (Fig 2).
A small spark is usual when putting the fuse into the holder.
Note: Wear suitable gloves when inserting fuses.
Quick Set Up Guide
Contents:
1 x Operator Manual
1 x Battery charging lead
2 x Keys
2 x 50 amp fuses (1 x spare)
1 x Maxi fuse-puller
Use Handle Grip when raising or lowering the
Fig 1
Always ensure the top (waste) tank is empty of water BEFORE lifting.
17
top waste tank.
Fig.2
Fig 2
!