i-WATTS I-SPB10W-700SMD Traduction Des Instructions D'origine page 8

GB
Thank you for purchasing a quality device. These instructions describe the proper use to ensure a long
life of your lamp working I-WATTS Please carefully read and understand these instructions before
SPECIFICATIONS:
LED SMD2835
I-SPB10W-700SMD
220-240V~50Hz
10W
700 Lumens
6000K
IP65
Tempered glass : 105*79*4mm
2
55cm
225*205*300mm
0.99Kg
DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING
Never attempt to change wire connection way as this has been fixed professionally.
The lighting fixture shall be fixed on stand vertically that the longitudinal axis does not slant than
±4°from the ground plate.
Disconnect the plug from the network when the front glass is open, and follow the instructions to
the next step.
Replace before using the shielding glass if it is damaged.
If the external flexible cable or cord of this luminary is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
LED PORTABLE FLOODLIGHTS
installation and use. Retain instructions for future reference.
WARNING: Packaging materials are not toys! Children must not play
with plastic bags! Danger of suffocation!
Denotes risk of personal injury or damage to the tool.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
In accordance with essential applicable safety standards of
Replace the protective glass if it is damaged before using
instructions.
European directives
The projector
I-SPB20W-1400SMD
220-240V~50Hz
20W
1400 Lumens
6000K
IP65
Tempered glass: 140*105*4mm
2
100cm
225*205*300
1.18kgs