Ceiling Mount - FS IPC201-2M-D Guide De Démarrage Rapide

Installing Waterproof Connector (Optional)
Install the supplied waterproof components to the Ethernet cable in
sequence.
NOTE: Please use self-adhesive waterproof tape (purchased separately) to
protect the cables.

Ceiling Mount

1. Locate the positions of the holes by pasting installation position
map on the ceiling, and lead the cables through the hole on the
ceiling.
2. Drill holes with a diameter of 6 - 6.5 mm and the depth of 30 mm in
the marked locations.
EN 7