Hama Twin Mode D'emploi page 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package Contents
• Bluetooth Audio Transmitter
• 3.5 mm audio cable (1.8 m)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial
use only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheat-
ing, and only use it in a dry environment.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
2
Warning
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.
• Do not open the device or continue to operate it if
it becomes damaged.
4. Technical Data
Supply voltage
Rated power consumption 60 mA
Ambient temperature
Bluetooth version
Pro le
Codec
Bluetooth power class
Frequency band(s)
Maximum radio-frequency
power transmitted
5. Startup and Operation
5.1 Connecting the audio transmitter
• Connect the USB plug (1) of the Bluetooth audio
transmitter to the USB port on your TV/PC/laptop or to
a standard USB power supply unit (5 V, 500 mA min.).
See Pic1a/Pic1b. The LED (2) on the audio transmitter
starts to ash.
• Connect the supplied audio cable (3) to the Audio IN
socket (4) of the audio transmitter and the Audio OUT
socket of your playback device.
5.2 Connecting the rst Bluetooth receiver
• Switch the Bluetooth receiver (e.g. Bluetooth headset)
to pairing mode. Refer to the operating instructions for
your Bluetooth receiver.
• Place the Bluetooth receiver within the range of the
Bluetooth transmitter. The Bluetooth transmitter will
automatically connect to the receiver. After successful
5 V; USB
0 to +55 °C
3.0 + DER
A2DP
apt-X, apt-X LL, SBC
Class 2
2402 MHz – 2480 MHz
3.7 (dBm)