Eurotops P 6201 Mode D'emploi page 5

P 6201 / TO 62001
Warning: Please read this instruction manual carefully before using the instrument
and keep it for future use.
A. SAFETY INSTRUCTIONS
1. The device is intended exclusively for private and not for commercial use. Only
use this device as describe in this instruction manual.
2. CAUTION blade is extremely sharp.
3. Use this product only for its intended use as described in this manual.
4. Keep out of reach of children.
5. If any parts of the multi-cutter tool appears to be damaged or malfunctioning,
discontinue use immediately.
6. Use eye protection when using this tool.
7. Avoid contact with blades. Wear protective gloves.
8. Take caution when opening the package and changing the blades.
9. Never twist the multi-cutter tool while using. This could cause the blade to break
into sharp pieces.
MULTI-CUTTER
Blade (1)
Titanium wire
cutter (2)
Replacement
blades storage
catridge (3)
lock switch (4)
Base release lever (5)
Anvil surface (6)
10. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
EN
B. HOW TO USE IT
1) Unlocking the safety lock :
Squeeze handle and pull the safety lock switch backwards to release the handles.
2) Cut with the multi-cutter tool :
With a secure grip on the handles, slide the object you want to cut between the anvil surface
and blade. DO NOT place object being cut beneath the wire cutting aera. And squeeze with
firm pressure to cut.
3) Using as a utility knife :
Pull down and slide the base release lever back towards the handles to slide the anvil surface
in. You can now use it as an utility knife.
4) Cut a wire with the multi-cutter tool :
Slide under the titanium wire cutter area of the jaws and hold in place. Squeeze handles firmly
closed to cut copper aluminum and steel wire.
5) Changing the blade :
Pull open the replacement blade storage cartridge (3) from the back of the upper handle.
Safety
Using a screwdriver, loosen the blade screws to remove the old blade. Insert a new blade
in the upper jaw and tighten blade screw back in place.
C. FEATURES
High carbon steel SK5 blade
Steel Q235 body
PVC Ergonomics handlles
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capacities, or by persons lacking in experience or knowledge, unless they are
supervised or instructed on the use of this apparatus by a person responsible for their
safety.Children should be supervised to ensure they do not play with this appliance.
Importé par / Imported by :
CAPTELEC, avenue de Flandres, 59170 Croix - FRANCE