Publicité
ENGLISH
1
, .)Before starting, please read our assembling
2.)Follow our assembling
instructions carefully.
3.)Compare
the listed parts and fitting list to the contents of the cardboard.
4.)Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
some way to difficulties during the assembling.
5.)To make sure that the furniture will not be damaged
coyer the floor with the cardboards
6.)We recommend
operating
7.)Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.)Keep the instruction and service sheets. Perhaps you will need them later on.
For wooden furniture consisting of glass and steel or MDF and coated surface:
Wood en Furniture: Stains con be taken off with a soft, moistened c10th or by using a special polish (available in supermarket
and specialized stores). But do not forget to wipe the surface with a dry and soft c10th afterwards.
Steel furniture:
The metal has a varnished surface. The material could show little discrepancies in colour, c10uds or stains due to the machine
made production
which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport, you could carefully try to twist them into the original
position. Please do not overwind the screws and retight them from time to time.
MDF and coated surfaces:
MDF consists of wood en fibres (please read the a.m. instructions). Do not work on the coated surfaces with knives or sharp
objects, as this could cause damage the material.That
Due to machine made production,
sand paper. Please do it carefully in order to make sure that you will not rem ove too much of the material.
Carrying out the assembly Îs for adults only. Please, keep your children away during assembling.
parts or fittings away or swallow them up. During assembling it could also happen that parts of your furniture fall down on
your children. Please, therefore, protect them and make sure that you carry out the assembling
If your piece of furniture consists of glass, it should be handled carefully during assembling.
and cause injuries. Therefore, you should protect your eyes and hands by wearing special c10thing and safety shoes,
available in the supermarkets
We are not liable for any material damage or injuries resulting from faulty assembling. We are also not liable for any
damage resultant from lack of maintenance
damage caused by faulty use or use against its purpose.
We wish you a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team
Inter Link SAS
Important assemb/ing suggestions:
instructions carefully and make yourself familiar with them.
or grated during assembling,
or another soft pad (i.e. c10th or carpet).
always with two or more people.
Maintenance advice:
should not be a reason for complaints
the MDF parts con have sharp edges. You could chamfer them with a fine standard
Warninq:
and specialized stores.
during use. (i.e. retightening
Bad tools lead in
prepare an adequate area and
afterwards.
Children might take small
in their absence.
Glass con break at any time
of screws, and etc ... ). We are not liable for any
3/13
Publicité
