Publicité
Les langues disponibles
Les langues disponibles
WHAT SHOULD I DO IF THE WARMING DRAWER DOESN'T WORK?
WARNING! Any repairs must only be
performed by a specialised technician.
Any repair performed by a person not au-
thorised by the manufacturer is potentially
dangerous.
However, the following faults can be
resolved by the user without calling Tech-
nical Assistance.
BEFORE CONTACTING TECHNICAL ASSIS-
TANCE, CHECK ON THE FOLLOWING:
•
The crockery does not warm up sufficiently.
Check whether:
– The appliance is on
– The appropriate temperature has been
selected
– The air circulation orifices are blocked by the
crockery
– The crockery was left to warm up for suffi-
cient time
INSTALLATION INSTRUCTIONS
BEFORE INSTALLATION
Check that the supply voltage indicated on the data
plate is the same as that provided by the power
socket you plan to use.
Open the drawer, take out all the accessories and
remove the packaging material
WARNING! The front surface of the
warming drawer may be covered in a
protective film. Carefully remove this film
before using the warming drawer for the
first time.
Ensure that the warming drawer is not
damaged in any way. Check that the
drawer opens and closes correctly. If
damage is encountered, inform Technical
Assistance.
WARNING! The power socket should be
easily accessible after the warming drawer
has been installed.
The warming drawer should only be in-
stalled in combination with the appliances
specified by the manufacturer. If it is fitted
in combination with other appliances, the
guarantee will be void since it is impossi-
ble to guarantee that the warming drawer
will work correctly.
•
Heating time depends on several factors, such
as, for example:
– The material and thickness of the crockery
– Load size
– How the crockery is arranged
•
The crockery does not heat up at all. Check
whether:
– You can hear the noise of the fan If the fan is
running, this means that the heating element
is defective. If the fan is not running, this
means that it is faulty
– The fuse has blown or the circuit breaker has
tripped
•
The crockery is too hot:
– The temperature selector is not working
INSTALLATION
Refer to the installation instructions sup-
plied separately.
Installing the warming drawer in combination with
another appliance requires be a fixed intermediate
shelf in the carcase to support the weight of both
appliances.
The appliance to be installed in combination with
the warming drawer will be installed directly on top
of it.
Follow the instructions given in the corresponding
instruction and installation booklet for installation of
the combined appliance.
ELECTRICAL CONNECTION
Electrical installation must be performed by a quali-
fied electrician.
Before connecting the warming drawer to the
mains electricity supply, check that the voltage and
frequency of the mains supply matches that shown
on the data plate inside the appliance.
The electrical connection should be made via an
omnipolar switch rated for the current capacity
with minimum 3 mm contact separation, in order to
provide isolation in emergencies or when cleaning
the warming drawer.
The connection must be suitably earthed.
9
Publicité
