Troubles And Solution Proposals; Setting Gas Cooktops As Per Gas Type - Everglades EVFH820 Manuel D'utilisation

TROUBLES AND SOLUTION PROPOSALS

You can solve the troubles you can encounter at your product by checking
the following points before calling technical service.
If cooktop does not operate;
• Check if power cable of cooktop is plugged in
• Examine with safe ways if electric exists on network
• Audit fuses.
• Control whether damage is available on power cable.
• Check if main gas valve in your network is open
• Go through existence of breaking or twisting on gas pipe
• Be sure that gasp pipe is connected to cooktop in appropriate way.
• See over if suitable gas valve is used for your cooktop
(Get periodical maintenance done)
If starter does not operate;
• Be sure that electric power cable of product is plugged in
• Clean the edge and body sections of ignition spark plugs found on
burners with a wet and dirt remover materials thoroughly. Be sure that
the channels present on burners are open and clean.

SETTING GAS COOKTOPS AS PER GAS TYPE

Gas type (LPG or natural gas) that your appliance is manufactured
foris stated in the label found behind the product and that show
technical features. If gas setting of your appliance is not the same
as gas setting of your network, it should be adjusted by making
change by an expert person. In the following table, injector, gas
flow and power values of appliance is given according to gas type.
GB
19