ACCO Brands Kensington PresentAir Pro Guide De Démarrage Rapide page 4

Pairing
NOTE: If this is your first time pairing
PresentAir™ Pro to your mobile device,
follow the instructions below.
1 Make sure your mobile device's
Bluetooth is On.
2 Open the PresenterWorks™ app.
3 Follow the pairing instructions in
the app to pair your PresentAir
to your mobile device.
4 When your PresentAir™ Pro is
successfully paired, you will see
the main screen of the app.
NOTE: if you currently have one
mobile device paired with PresentAir™
Pro and want to pair with a new
mobile device, un-pair PresentAir™ Pro
from the current mobile device first.
If you want to use PresentAir™ Pro
without the app, follow the
instructions below.
1 Make sure your PresentAir™ Pro is
not in sleep mode.
2 Press and hold the mode button for
3 seconds. The blue LED will blink.
3 Go to Bluetooth settings on your
mobile device and select PresentAir
XXXX to complete pairing.
Power and Battery
• PresentAir™ Pro will go to sleep mode
if it's left on and not being used. Press
the Mode Button or Laser Button to
wake up PresentAir™ Pro.
Pro
™
6
• Press the mode button for 7 seconds
when PresentAir™ Pro is active and
it will go to sleep mode.
• Under normal use the battery can
last about 6 months.
Mode Switching
PresentAir™ Pro has two default modes
and one custom mode configurable via
the PresenterWorks™ app.
Presenter Mode:
Press Mode Button and Up Button
Media Mode:
Press Mode Button and Middle Button
Custom Mode:
Press Mode Button and Down Button
Hardware Reset
If the device stops functioning properly
or has become unresponsive, performs
a hardware reset by pressing the reset
button using a small paperclip. The
LED indicator will blink blue during
reset.
7