Ondal Acrobat 2000 Mode D'emploi page 13

Welcome
Changes or modifications
Trademarks
Customer Service
Published by
Visit us on the Internet
Thank you very much
for purchasing the Acrobat 2000 wall arm. Please read through these Operating
Instructions carefully before using the appliance. This will allow you to take ad-
vantage of all the features of this new appliance and protect yourself and others
from possible injury.

The appliance is designed according to state-of-the-art technology and is safe
to operate. Hazards may nevertheless still occur with this appliance. In par-
ticular if it is used by staff without sufficient training or if not used properly
and in accordance with its intended purpose.

Please instruct staff about operation, cleaning and care of the appliance in
accordance with these Operating Instructions.

Unauthorised changes or modifications to the appliance are not permitted
for safety reasons. Unauthorised changes, modifications or the use of parts
not supplied by the manufacturer or the manufacturer's agents will invalidate
the manufacturer's guarantee for this appliance. The manufacturer is hereby
exempt from any liability whatsoever for damage or injury resulting from un-
authorised changes or modifications or as a result of not using OEM spare
parts. ONLY USE OEM SPARE PARTS!

If you encounter special problems which are not covered in sufficient detail
by these Operating Instructions, please contact Customer Service for your
own safety

Acrobat® is a registered trademark.

All other trademarks mentioned in these Operating Instructions are the sole
property of the relevant manufacturers.
Keep these Operating Instructions in a safe place near the appliance so you can
look up safety instructions and important information in the future. These Oper-
ating Instructions are part of the appliance. Please do not pass on this appliance
without the Operating Instructions.
How to contact us
Customer Service is available for you

if you have queries about the appliance or its installation

when you want to order spare parts

for servicing or guarantee claims.
The address of the customer service office responsible for you can be found on
the supplement "Service Sheet".
Published by
ONDAL Industrietechnik GmbH • Wellastrasse 6 • 36088 Hünfeld • Germany
Telephone: +49 / (0)6652 / 81-0
© ONDAL Industrietechnik GmbH
Edition 10/2010, version 1
Subject to change without notice
www.ondal.de
13
GB
B
D
D
D