Using The Four Seasons ™ Unit - Envion FOUR SEASONS Mode D'emploi

10
USING THE Four Seasons
1. Plug the unit into an electrical outlet and press the power button
to turn on your Four Seasons
2. Turn the mode knob to select the desired function. You may
choose to use either the heater, the humidifier, or the heater and
humidifier together.
Note: No matter which mode you select, the True HEPA air purifier
feature will always be active.
3. Once you have chosen the mode you can control how much air passes
through your Four Seasons
medium or high as you prefer.
4. When you select either the heater mode or the heater + humidifier mode
you may control the amount of heat your Four Seasons
Choose your desired heat output with the variable control.
REPLACING THE HEPA FILTER
1. Make sure unit is turned off and unplugged. To remove the True HEPA cover
frame, press the release tab and pull the frame outwards. See Figure 3A/B.
2. Remove the True HEPA filter by pulling the filter out from the unit.
See Figure 4.
3. Insert a new HEPA filter, then place HEPA cover frame back into position.
Replacement True HEPA filter – FS200F
Figure 3A
™
unit.
™
unit by sliding the fan speed button to low,
™
Figure 3B
Release
Tab
produces.
™
Figure 4