Connections; Caster Installation - Samson RSX18A Mode D'emploi

Connections

The RSX18A features balanced inputs and outputs with industry standard XLR
connectors. Whenever possible, use high quality balanced connections to other
equipment to suppress interference. See the wiring diagram below for RSX18A
connectors.
XLR to XLR Balanced
XLR to Balanced 1/4-Inch

Caster Installation

• Locate one caster and four each of the
supplied screws and lock washers.
• Hold the caster in place and hand start
the screws. Be careful to ensure that
the screws are on the proper thread
chase. Do not push down on the screws,
as it could dislodge the internal thread-
ed t-nuts.
• Use a screwdriver to tighten the four
screws.
• Repeat the steps above for the remain-
ing three casters.
RSX18A 13