Télécharger Imprimer la page

Troubleshooting; Warranty; Ce Declaration Of Conformity; Environmentally-Friendly Disposal - Wolf Garten 72V Li-ION POWER 24B Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18

Troubleshooting

Risk of injuries or material damage
¾ In case of doubt always consult a specialist workshop.
¾ Before any inspection or any work on the device, switch the motor off and remove the power
pack.
Problem
Possible cause
The device switch-
The power pack is too hot.
es off.
The power pack is discharged.
The temperature of the device (electronics) is too
high.
Overcurrent release
The device will not
The power pack is discharged.
switch on.
Overvoltage release
Overcurrent release
Power pack temperature too high or too low.
The power pack is defective.
Spare parts and accessories
Order no .
196-651-650
196-652-000
196-650-650
731-12866
746-05381

Warranty

The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufacturing
defects are the cause. Should you need to call upon
the warranty, please apply to the vendor of your
machine or to the nearest branch.

CE Declaration of Conformity

Further details about the device are con‑
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
Part code
POWER Base 72V
POWER Base 72V Basic 72V charger
Li-High Energy 72V
Rake
Carrying belt
Troubleshooting
WARNING !
Part description
72V charger
72V power pack
-
-

Environmentally-friendly disposal

Electrical tools, accessories and packaging must be
routed into an environmentally compatible recycling
chain.
environmentally friendly manner.
For EU countries only: Defective or used power
packs/batteries must be recycled in accordance with
2013/56/EU.
Do not throw your power tool away with domestic
waste! Take it to a disposal facility.
Remedy
Allow the power pack to cool.
Charge the power pack.
Allow the device too cool and if neces-
sary, clean the air inlet.
If this occurs again take your device to a
specialist workshop.
Charge the power pack.
If this occurs again take your device to a
specialist workshop.
If this occurs again take your device to a
specialist workshop.
Allow the power pack to cool or heat up.
Replace the power pack.
Power packs/batteries:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
V LI-ION POWER
B |
EN
| 17

Publicité

loading