Transport And Storage - jcb 18AG Instructions D'utilisation

Stubborn contamination in areas hard to
m
access can be removed with compressed air
(max 3. bar).
Regularly check all fasteners, screws and
m
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
WARNING!
Never open the tool. The tool has no
internal parts that the user can service or
repair. Never try to repair the tool yourself.
Take to an authorised service centre.

Transport and Storage

If the tool will remain unused for any length
m
of time, it should be stored in the original
packaging.
Store the tool in a dry, frost-free, well
m
ventilated place.
Keep all tools out of the reach of children.
m
Always switch off the tool and disconnect it
m
from the power supply (remove the battery/
unplug the power cord) before transport.
Always carry the tool using the purpose-
m
designed handle.
Ensure that the tool is not at risk of tipping
m
over or exposed to excessive vibration and
shocks during transport, especially if the tool
will be transported by car or other vehicle.
NOTE
Operating temperature: 0~40 °C
Storage temperature: -20~60 °C
18
JCB-18AG
Instruction & User Manual