ARENDO SERENITY 302602 Mode D'emploi page 15

If the brightness of the LEDs is too high, you can dim it by keeping the "POWER"
key pressed.
8 Cleaning and Maintenance
Caution! Ensure that the plug has been disconnected from the socket before
cleaning!
We suggest cleaning of the water tank and the base once a week, if used frequent-
ly. Ensure that the water in the tank is changed regularly.
Before storing it away ensure that the tank and the base unit are dried completely.
Cleaning the base:
Remove the lid and the water tank. Using a clean cloth, remove any water resi-
dues and stains from the device. Do not use any aggressive or chemical cleaning
agent.
Cleaning the atomiser:
Remove the lid and the water tank. Using a clean cloth, remove any water
residues and stains from the device. Clean the atomiser using a soft brush or
alternatively a toothbrush. Then wash the metal plate with water and allow the
device to dry completely and uniformly.
Cleaning the water tank:
Remove the lid and the water tank. Rinse the tank using a vinegar solution. Then
wash the tank thoroughly with water. Do not leave any residue of vinegar in the
tank. Dry the device completely and uniformly.
15
English