Publicité
Les langues disponibles
Les langues disponibles
Do not touch the blades while the appliance is
operating and do not try to block their movement
in any way.
Do not use the appliance without any food in it.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
IMPORTANT INFORMATION
This appliance is not intended for professional use. You should follow the requested breaks.
Failure to follow this instruction carefully may result in damage to the motor. Please refer to the
rating label for the maximum continuous usage time (KB xx min where xx is the allowed
maximum usage time). The breaks should last at least 10 minutes.
MOUNTING AND USE OF THE FOOD PROCESSOR
The food processor is equipped with a beater, whisk and dough hook. With those accessories
you can beat, knead and mix.
Put the appliance on a stable level surface.
Make sure that the appliance is in "0" position, and that the appliance is unplugged.
Fill the stainless steel bowl with the chosen ingredients.
Press the release button of the bracket and place the bracket in vertical position.
Place the stainless steel bowl on the base and turn it clockwise to lock it in place.
Insert the beater, dough hook or whisk onto the axis of the bracket and turn it
anticlockwise to lock it in place.
Check if the accessory is locked properly by pulling it gently.
Press the release button of the bracket in order to put the bracket back in horizontal
position so that the accessory is immersed in the bowl.
Fit the bowl cover onto the bowl.
Plug in the appliance and select the desired speed. For the dough hook (e.g. to make
dough for cake or biscuits) we recommend a low speed (1-4), for the beater (e.g. for dry
ingredients such as butter, potatoes and flour) we recommend a medium speed and for
the whisk (e.g. for egg white or whipped cream) we recommend a high speed (7-8).
The position "P" (Pulse) is particular because the button has to be held manually. If you
release it, the appliance stops.
During use you can add ingredients through the opening of the bowl cover.
When the preparation is ready, move the switch to position "0" and unplug the appliance.
Press the release button of the bracket and place the bracket in vertical position. Remove
the accessory and the bowl cover.
Turn the stainless steel bowl anticlockwise and take it off the base.
12
Publicité
