Publicité
Les langues disponibles
Les langues disponibles
User's Guide
Typical connections
X
A
A:
Circuit board under test
B:
Test header on circuit board
C:
MSO ground lead
D:
Ground pin on circuit board
E:
MSO probe head
F:
Digital interface cable to MSO port of PicoScope 6000E Series oscilloscope
G:
TA369 MSO pod (up to two per PicoScope oscilloscope)
X:
Ground pin on circuit board
Y:
MSO ground clip
Hints:
•
For best performance with high-speed signals, connect the ground terminal of each probe to the circuit
ground as close as possible to the signal under test. Use either the ground leads (C) or the ground clips
(Y) supplied. The ground clips enable the probe to fit on a pair of 0.1"-pitch header pins.
•
Ungrounded probes will share the ground path with grounded probes, lowering performance and
causing crosstalk between digital channels.
DO327-1
Y
B
C
Copyright © 2020 Pico Technology Ltd. All rights reserved.
D
E
TA369 8-channel MSO Pod
F
G
7
Publicité
