Controlling Videotape Playback - Insignia NS-H4005 Guide De L'utilisateur

5 To stop playback, press STOP
Note
Your home theater system has an Auto Play System
feature. If your home theater system is turned off and you
insert a videotape with the erase-prevention tab removed,
your home theater system automatically turns on and plays
the videotape. When playback is complete, your home
theater system rewinds and ejects the videotape, then turns
off.

Controlling videotape playback

To control videotape playback:
• To search while the videotape is playing, press
BACKWARD
normal playback.
Note
Horizontal lines appear in search mode. They will disappear
when you resume playback.
Sound is muted while in search mode.
When you end high speed search mode, your home theater
system takes a few seconds to stabilize the tape speed.
During this time, you may see slight interference on the
screen.
If the VCR is in search mode for more than three minutes,
your home theater system starts normal playback to protect
the videotape and video heads.
• To freeze the image and pause playback, press
PAUSE/STEP . Press PLAY
Note
If the still picture vibrates vertically, press
the picture.
If the VCR is in still mode for more than three minutes, your
home theater system goes into stop mode to protect the
videotape and video heads.
• To advance the videotape one frame at a time, freeze the
image, then press PAUSE/STEP
time you press the button, the videotape advances one frame.
Press PLAY
22
Insignia NS-H4005 Home Theater System
.
or FORWARD
to resume normal playback.
www.insignia-products.com
. Press PLAY to resume
to resume normal playback.
or to adjust
one or more times. Each