Connecting Your Computer (Mm 008 Adc) - THORENS MM 008 Mode D'emploi

Connecting your computer and
recording audio tracks (ADC)
The MM 008 ADC is equipped with a high-resolution
analogue-to-digital converter allowing you to record vi-
nyl tracks directly onto your computer's hard disk. It will
work both with Microsoft® Windows® and Apple® Mac
OS® based computers.
Connect the USB socket (9) on the rear panel to a free
USB socket on your computer using the cable sup-
plied or any other approved USB cable. The computer's
new hardware device assistant should recognise the
MM 008 ADC, which will show on the screen as "Tho-
rens MM-008ADC" while the installation is in progress.
Once the hardware installation is complete, you can
start recording.
Please ensure that your recording software is set
up to accept audio from USB and that it recognises
"Thorens MM-008ADC" as its audio source.
10
Recording software:
Both Microsoft® Windows® and Apple® Mac OS®
come with very simple audio recording software pre-in-
stalled. However, to take full advantage of the high-res-
olution recording facilities offered by the MM 008 ADC,
we recommend recording software that can record at
24 bits/96 kHz and save lossless high-resolution audio
files such as FLAC or Apple® Lossless.
Please visit www.thorens.com/adc for a list of recom-
mend third-party recording software available for down-
load from the internet.
Note: When downloading files from the internet, you
should always use up-to-date anti-virus software.
Thorens accepts absolutely no responsibility and
provides no support for third-party software.