San Jamar Kleen-Cup KLC28C Instructions D'utilisation Et D'entretien

Kleen-Cup
Kleen-Cup
®
is completely safe
for all types
of dish machines.
KlC28C
Replacement Brush#
KLCBRUSH
*nOTe: Sanitizer solution
effectiveness is depleted with use.
Check sanitizing solution regularly
with appropriate test paper
(Saf-Check™ by San Jamar can assist).
Change solution if test paper indicates
a less than satisfactory ppm count.
®
use And Care Instructions
TO SAnITIZe
SpInDleS BeTWeen
BeVeRAGe MIXInG
HOW TO CleAn
Kleen-Cup
®
nOTe:
Brushes must be
inserted narrowside
first, so space
inside of brushes is
consistent.
Remove brushes
before cleaning.
TO SAnITIZe SpInDleS BeTWeen
BeVeRAGe MIXInG
1. Fill clean Kleen-Cup 3/4 full with food contact-
®
approved, properly mixed, sanitizing solution.
2. Raise up Kleen-Cup around spindle and turn on.
®
3. With mixer on, use circular and up & down movement
to ensure spindle comes in contact with all three brushes
for 30 seconds.
4. To remove excess sanitizer, run mixer for 30 seconds
with empty blender cup in place. DO nOT RInSe OR
DRY WITH TOWel AFTeR SAnITIZInG.
A. DISHWASHInG
Kleen-Cup is dishwasher safe, for thorough cleaning.
®
• To clean, remove brushes and run individual parts
through dishwasher.
B. MAnuAl WASHInG
WASH
• Remove brushes by tilting top of brush toward the center
of cup and pull up and out.
• Rinse the interior and exterior of the cup to remove food
residue.
• Immerse the Kleen-Cup
• Wash the inside and outside of the Kleen-Cup
the detergent solution.
RInSe
• Immerse the Kleen-Cup
• Completely rinse all traces of detergent.
SAnITIZe
• Immerse Kleen-Cup into the sanitizing solution, mixed
®
accordingly to manufacturer guidelines, for one minute.
• Store Kleen-Cup upside-down while allowing for proper
®
air drying.
• For best results, when re-inserting brushes, ensure they
are seated all the way to the bottom.
into the detergent solution.*
®
then drain
®
into the rinse water.
®