Setting The Clock; Cooking - THOMSON TMFC70IX Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the Clock

The clock is set on a 24-hour cycle.
1. Press
. The hour digit will flash.
2. Turn the thermostat control knob to set the correct hour.
3. Press
to confirm and then the minute digits will flash.
4. Turn the thermostat control knob to set the correct minutes.
5. Press
to confirm. ":" will flash on the display.

Cooking

1. Turn the function knob to select the desired function.
 The corresponding function indicator light will illuminate.
2. Turn the thermostat knob to select the desired temperature.
 NOTE: You cannot adjust the temperature in oven lamp and defrosting functions.
3. Press
to start cooking.
 The display will show the progress bar
The defalut cooking time (9 hours) will flash on the display.
 The progress bar will show progress by decreasing the progress blocks in this bar.
 During cooking, you can check the clock time by pressing
be displayed for about 3 seconds and then the display will return to the current
state.
4. During cooking, you can adjust the cooking time and temperature by turning the
function and thermostat knob respectively. Press
 NOTE: You cannot set the cooking time in the oven lamp function.
 The default and maximum cooking time is 9 hours (9:00).
 If you do not confirm the setting within 3 seconds after adjusting the cooking
time and temperature, the oven will revert back to the previous cooking time and
temperature to continue cooking.
 When turning the function knob to adjust the cooking time, the cooking time will
be increased by 1 minute for the initial 30 minutes, and then increased by 5
minutes up to 9 hours.
, the selected temperature.
EN-10
. The clock time will
to confirm.

Publicité

Table des Matières
loading

Table des Matières