HL_Skyr@cerAP544.book Page 14 Wednesday, February 12, 2003 3:19 PM
ENGLISH
3.1.5. SECURITY
This page is where you configure the security features supported by this Access Point.
Password:
Allows you to change the new login password. Here are the necessary steps:
1.
Enter the new password in the " AP Password New: " field.
2.
Enter the new password again in the " Confirm " field.
3.
Click " Apply "
!Note: The wireless clients will not be able to recognize the Access Point using Site
Survey utilities, such as zero configuration utility provided in Windows XP.
MAC Filter
14
Skyr@cer Access Point 544