Blaupunkt San Francisco 300 Mode D'emploi Et De Montage page 40

User settings
Press the button
u
volume control 4 to perform the setting.
REG
(only for tuner region "EUROPE")
Only possible in FM radio mode: Switching REG
function on or off. Settings: ON, OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
PTY LANG
(only for tuner region "EUROPE")
Only possible in FM radio mode: Selecting the
language for the display of programme types. Set-
tings: ENGLISH, FRANCAIS, DEUTSCH.
button > to open the sub-
Press the
u
menu.
Press the button
u
tween the settings.
PTY
(only for tuner regions "EUROPE", "USA",
"S AMERICA")
Only possible in FM radio mode: Switching PTY
function on or off. Settings: ON, OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
DISP COL
Mixing the colour for the display illumination from
the basic colours Red, Green and Blue (RGB). Set-
tings: For R, G and B each 0 to 16.
button 5 to select the "4096
Press the
u
COL" submenu (setting R, G and B) or
button > to select the "256 COL"
the
submenu (setting R and G, B remains un-
changed).
button > to open the sub-
Press the
u
menu.
40
02_SanFrancisco300_gb_0309.indd 40
@ / 2 or turn the
@ / 2 to change be-
Press the button
u
between the colours.
The value of the selected colour fl ashes.
@ /
Press the button
u
value of the selected colour.
Briefl y press the MENU•OK button ? to
u
confi rm the selected setting.
SCAN
Switching the constant colour change of the dis-
play illumination on or off. Settings: ON, OFF.
button > to open the sub-
Press the
u
menu.
button > to change between
Press the
u
the settings.
Briefl y press the MENU•OK button ? to
u
confi rm the selected setting.
If the constant colour change is switched on, the
colour of the display illumination changes con-
stantly across the colour spectrum.
COL SCAN
Selecting the colour of the display illumination
during a colour seek.
button > to start the colour
Press the
u
seek.
The display alternately shows "SCANNING"
and "OK (MENU)" and the colour of the dis-
play illumination changes constantly.
Briefl y press the MENU•OK button ? to se-
u
lect the currently set colour.
DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 – 16.
button > to open the sub-
Press the
u
menu.
@ /
Press the button
u
the setting.
If your car sound system is installed as described
in the installation instructions and your vehicle
features the corresponding connection, the dis-
5 / > to change
2 to adjust the
2 to perform
26.03.2009 13:20:32 Uhr