Publicité
Les langues disponibles
Les langues disponibles
"System"
"USB"
Adjust the system settings:
1.
Select the menu item.
2.
Adjust the setting.
3.
Press the OK button.
4.
Press the exit button to exit the
menu.
"Parental Guidance": Restrict access to
channels that are unsuitable for
children. To lock the channel, enter
the password.
"Set Password": Change the password
for locked programs. Enter the old
password, followed by the new
password. To confirm, enter the new
password again.
"Factory Default": Enter the password
and press the OK button to return to
the factory settings. All channels and
settings will be deleted.
"Information": View information
regarding the model, the hardware
and the software.
"Software Update":
•
Enable or disable the Over Air
Download (OAD) function.
•
Upgrade the software via USB.
Adjust the USB settings:
1.
Select the menu item.
2.
Adjust the setting.
3.
Press the OK button.
4.
Press the exit button to exit the
menu.
"Photo Configure":
• "Slide Time": Set the slide show
interval.
• "Slide Mode": Set the slide show
effect.
• "Aspect Ratio": Display the photo
with its original aspect ratio.
• "Discard": Display the photo in
full-screen mode.
"Movie Configure":
• "Aspect Ratio":
- "Keep": Play the movie with its
original aspect ratio.
- "Discard": Play the movie in
full-screen mode.
• "Subtitle Specific":
"Small" / "Normal" / "Big": Display
subtitles in small mode, normal
mode or large mode.
• "Subtitle BG":
- "White" / "Transparent" / "Gray" /
"YellowGreen": Display subtitles in
white, transparent, grey or
yellow-green background.
• "Subtitle FontColor":
- "Red" / "Blue" / "Green" / "White" /
"Black": Display subtitles in red,
blue, green, white or black font.
"PVR Configure":
• "Record Device": Select the disk for
recording.
• "Format": Format the selected disk.
7 7
"Multimedia"
PVR function
Preparation
1.
Make sure that all previous data on the USB device is backed up to prevent
loss of data.
2.
Before starting PVR recording, make sure that the device is switched off
before you insert a USB device with a minimum of 4 GB of free space.
3.
Make sure the USB device is correctly inserted to prevent damage to the USB
port.
4.
You can record only one programme at a time.
5.
To prepare the USB device, follow "PVR Configure" in the "USB" menu.
Recording
1.
Select the programme.
2.
Press the record button to start recording. The screen briefly shows the
message "Enter record waiting".
3.
Press the info button once to display the record time indicator. Press the info
button twice for further information.
4.
Press the stop button to stop recording.
5.
Press the OK button to cancel recording.
6.
Press the exit button to continue recording.
Playback
1.
Press the menu button.
2.
Select "USB". Press the OK button.
3.
Select "Multimedia". Press the OK button.
4.
Select "PVR". Press the OK button. The recorded programmes are listed in the
HBPVR folder.
5.
Select the programme. Press the OK button.
6.
To preview, delete or rename a file, follow the on-screen instructions.
7.
To delete a file, press the yellow button. Press the OK button.
Note: You cannot delete or rename a file in playback mode.
8.
To move up in the menu, press the exit button.
EPG Schedule Timer
1.
Press the EPG button to display the electronic program guide (EPG).
2.
Select the programme. Press the OK button.
3.
Check the "Event add" information on screen.
4.
Press the down button to select the mode.
5.
Press the right button to select "View" or "Record".
"View": An on-screen message will alert you at the time of the scheduled
programme. If necessary, you can change the channel.
"Record": To record programmes at a later preset time. An on-screen message will
alert you when the recording is due to start. Note: You cannot change the channel
without stopping recording.
Book list
The book list function shows a schedule with all programmed recordings.
1.
To open the book list directly when you are watching a channel, press the
blue button.
English
"Multimedia":
1. Press the up/down buttons to
select different files.
2. Press the OK button.
3. Use the buttons on the remote
control to play the multimedia.
Colour buttons:
1. When the picture is shown, press
the red button in zoom mode to
switch between preview and
fullscreen.
2. Press the green mode to rename
the PVR file on the PVR playback
page.
3. Press the yellow mode to delete
the PVR file on the PVR playback
page.
4. Press the blue button to enter grid
show mode.
Publicité
