Rittal SK SK 3108.100 Notice De Montage page 3

English
1. Technical data
Model No. SK
Enclosure internal fan
Rated voltage V/Hz
Air throughput, unimpeded airflow
Axial fan
Rated current/fan
Output/fan
Temperature range
Model No. SK
Thermostat
Model No. SK
Temperature indicator with
switch contact
Pre-fuse
Voltage tolerance
Starting current (50/60 Hz)
2. Assembly
Observe assembly sequence 1 – 5 and installa-
tion information (see page 5).
Assembly instructions for adjustment and
locking of internal fan:
1. Secure internal fan to TS/PS frame section by
using screws (item 1).
2. Loosen screws (items 2) at axis A/B.
3. Turn fan around A/B axis until desired
position is reached (30° steps).
4. Re-tighten screws (item 2) at axis.
5. Connect connection cable to item 3.
The airflow direction of the fan is marked by
a sign on the fan housing.
3. Electrical connection
See wiring diagram on page 6.
Supply voltage and frequency must corre-
spond to the rated values stated on the name-
plate. The relevant requirements of the local
electricity board must be observed.
Electrical connection and repair must be
carried out by authorised specialist personnel
only.
Use original spares only.
3108.100
230/50/60
3
160/180 m /h
Self-starting shaded pole motor
0.11 A/0.10 A
19 W/18 W
– 10 °C to + 55 °C
3110.000
3114.000
2 A
+- 10%
0,13 A/0,12 A
0,13 A/0,12 A
4. Cascading
By using a terminal strip several enclosure
internal fans may be used in a cascading
mode. The terminal block may either be
fixed to the left or right hand side of the fan
housing.
5. Scope of supply
1 enclosure internal fan, completely wired,
assembly instructions and fixing materials.
6. Guarantee
We will guarantee this unit, if used correctly,
for 1 year in respect of materials and manu-
facturing faults, from the date of its supply.
7. Accessories
7.1 Thermostat SK 3110.000
7.2 Temperature indicator with switch contact
SK 3114.000
(only for 230 V AC fan)
7.3 Speed control SK 3120.000
(only for 230 V AC fan).
3108.115 3108.024
115/50/60 24 V (DC)
3
160/180 m /h
DC motor
0.22 A/0.20 A
20 W/20 W
3110.000 3110.000
3114.000
0,18 A
3
180 m /h
0.145 A
3.5 W
–
3