Automatic Code Search For Some Well-Known Brands; Automatic Code Search For All Brands; Manual Code Search - Ebode TAKE 6 Guide Utilisateur

6. Repeat this procedure from step 1 for the other equipment you want to
control (DVR, DVD, STB,...). If your equipment (TV, STB, etc....) does not respond,
try the other codes for your brand. If it still doesn't respond, try the manual
code search method (4.4 Manual code search).

4.2. Automatic code search for some well-known brands

If your brand is listed hereafter, you can use the brand search method (faster
than the "manual" and the "automatic code search").
Daewoo / JVC
/ Panasonic /
Sharp / Sony /
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights steadily. Release S
button.
3. Press the mode button (4) that matches the equipment you wish to control.
The LED (2) blinks once.
4. Enter the code corresponding to your brand, point the TAKE 6 Remote in the
direction of your equipment, press CHAN+ (6) once only. Continue to point the
TAKE 6 Remote at your equipment until the equipment changes Channel (the
remote control sends an IR signal every
equipment reacts). When your equipment does react, press on the key -/--
(13) to confirm. If you accidentally miss the code, you can stop the
autosearch by pressing CHAN- (6) and by repeatedly pressing this key return
to the right code. Press -/-- (13) to confirm.

4.3 Automatic code search for all brands

When searching an unknown code, you can step through the library
automatically (AutoSearch). When your equipment responds, you can stop
the searching process and store the code you found.
Note: as you can dedicate any appliance (TV, DVD, STB...) to DVR, DVD, CD,
STB, AUDIO or AUX key, you need first to enter any 4-digit code for the kind of
appliance you wish to control (found in the code book), i.e.: If you want to
program a STB under the DVR key, enter ANY STB code found in the code
book and then follow the steps below:
1. Turn on the device you want to control.
2. Press and hold S (8) until the LED indicator (2) lights steadily. Release S
button.
3. Press the mode button (4) that matches the equipment you wish to control.
The LED (2) blinks once.
4. Press CHAN+ (6) once. After a few seconds the remote starts stepping
through the code library (fast search, 1 code per second). When the device
responds, you can press CHAN+ (6) to switch to slow search (1 code per 3
seconds). You can step back by pressing CHAN- (6) (you can step forward by
pressing CHAN+ (6) in case you went too far back). As soon as the device
responds again, press the -/-- key (13) to store the code you found.
Remark: if some functions of your equipment don't work, you need to try
another code for your brand. The search function starts after the last
confirmed code. For example, if it was 030, the search function starts at 031,
and it will keep on trying until the last possible code.

4.4 Manual code search

Note: as you can dedicate any appliance TV, DVR, DVD, STB, AUDIO, AUX,
keys, you first need to enter any 4-digit code for the kind of appliance you
wish to control (found in the code book), i.e.: If you want to program a STB
16-10-2009
BRAND CODE
Philips /
Radiola
Akai /
Toshiba
Brandt /
Thomson
BRAND
Telefunken / Saba
1
/ Normende
Grundig /
2
Blaupunkt
3 Nokia / ITT
second. Please wait until your
7
CODE
4
5
6
033000=15299