Tips On Using Wii Motionplus; Tips On Using Wii Motionplus With The Nunchuk; Replacing The Batteries In The Wii Remote - Nintendo Wii MotionPlus Mode D'emploi

Tips on using Wii MotionPlus

• Grip the Wii Remote firmly and use the wrist strap to prevent losing your
grip on the remote and causing damage to the remote or surrounding
objects, or injury to other people.
• Make sure the lock switch is in the lock
position before using the remote with
Wii MotionPlus attached.
Lock switch in lock
position
Make sure all players use the wrist strap and that the strap lock is correctly
tightened.
IMPORTANT: Do not hold or swing the
Wii Remote by the Wii MotionPlus
accessory.
Hold the Wii Remote securely and do no let go
of it.
When using the Wii Remote controller in the horizontal
position, you can remove Wii MotionPlus if it is difficult
to press the 1 and 2 Buttons.
6

Replacing the batteries in the Wii Remote

The Wii Remote uses AA batteries. Nintendo recommends high quality alkaline batteries
for best performance and longevity of battery life. If you use rechargeable nickel
metal hydride (NiMH) batteries, be sure to follow the manufacturer's
guidelines for safety and proper usage.
WARNING - Battery Leakage
Leakage of battery fluid can cause personal injury as well as damage to your remote. If
battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery
fluid away from your eyes and mouth. Leaking batteries may make popping sounds.
To avoid battery leakage:
• Do not mix used and new batteries (replace all batteries at the same time).
• Do not mix different brands of batteries.
• Nintendo recommends alkaline batteries. Do not use Lithium ion, nickel cadmium
(nicad), or carbon zinc batteries.
• Do not leave batteries in the Wii Remote for long periods of non-use.
• Do not recharge alkaline or non-rechargeable batteries.
• Do not put the batteries in backwards. Make sure that the positive (+) and negative
(-) ends are facing in the correct directions. Insert the negative end first. When
removing batteries, remove the positive end first.
• Do not use damaged, deformed or leaking batteries.
• Do not dispose of batteries in a fire.
1. Unlock Wii MotionPlus by pushing
the lock switch downwards.
2. Pull the sensor unit out of the
Wii Remote while holding down
the lock release buttons. Swing the
sensor unit down and away from
the base of the Wii Remote.
8

Tips on using Wii MotionPlus with the Nunchuk

• Grip the Wii Remote and Nunchuk firmly and use the wrist strap to prevent
losing your grip on the remote and causing damage to the remote or
surrounding objects, or injury to other people.
• Make sure the connector cover cord is fed through the connector hook and
that the connector cover is securely locked in place by inserting the tab into
the connector hook.
Connector cover locked
in place
Make sure all players use the wrist strap and that the strap lock is correctly
tightened.
IMPORTANT: Do not hold or swing the
Wii Remote by the Wii MotionPlus
accessory.
Hold the Wii Remote securely and do no let go
of it.
3. Remove the Wii Remote from the
jacket. Carefully pull the wrist strap
through the wrist strap slot.
4. Remove the battery cover and the
old batteries, pulling the positive
(+) end out first. Insert the new
batteries, inserting the negative (–)
end first.
5. Replace the battery cover, making
sure the two clips on the end are
correctly inserted into the Wii
Remote, pushing until it clicks
firmly in place.
6. Reinstall Wii MotionPlus onto the Wii Remote. Review the separate Wii MotionPlus
Installation Guide included with this product for instructions.
7
Carefully
remove the
wrist strap.
Insert the
negative (–)
end first.
9