Publicité
Les langues disponibles
Les langues disponibles
Nowsonic Autark ID07
GB
User manual
Setting the music sensitivity
Using the
d
d
for music control in Auto mode (low = 1, high = 100).
Otherwise you can deactivate the music control feature
(off): The sensitivity is also displayed via the
next to the battery indicator.
Confirm your entry by pressing the
d
d
mode for music control
LED
Using the
d
d
for the Auto mode (Sov1 = steady light, Sov2 = strobe,
Sov3 = fade in, Sov4 = fade out).
Confirm your entry by pressing the
d
d
Choosing Master mode
Using the
d
d
operate the Autark
slave devices.
Confirm your entry by pressing the
d
d
Setting the
Using the
d
d
brightness for all 7
Confirm your entry by pressing the
d
d
Setting the light intensity for the color mode Red
Using the
d
d
for the red color component (off = 0, maximum = 255).
Confirm your entry by pressing the
d
d
and
buttons, select the desired sensitivity
SIGNAL LED
ENTER
button.
and
buttons, select the desired
ENTER
button.
and
buttons, select the on entry to
ID07
in Master mode with (one) other
ENTER
button.
brightness
LED
and
buttons, set the desired overall
s (off = 0, maximum = 255).
LED
ENTER
button.
and
buttons, set the desired light intensity
ENTER
button.
LED
mode
14
Setting the light intensity for the color mode Green
Using the
and
buttons, set the desired light intensity
d
d
for the green color component (off = 0, maximum =
255).
Confirm your entry by pressing the
d
d
Setting the light intensity for the color mode Blue
Using the
and
buttons, set the desired light intensity
d
d
for the blue color component (off = 0, maximum = 255).
Confirm your entry by pressing the
d
d
Setting the light intensity for the color mode White
Using the
and
buttons, set the desired light intensity
d
d
for the white color component (off = 0, maximum =
255).
Confirm your entry by pressing the
d
d
Turning the
s on/off
LED
Using the
and
buttons, select the desired status (off
d
d
= no, on = YP ( S).
Confirm your entry by pressing the
d
d
Setting the duration for the
display
LED
Using the
and
buttons, set the lighting duration
d
d
for the Autark display: when set to on, the display lights
continuously. With the other options (30, 60, 90, 120)
you can set the duration until the display goes off.
Confirm your entry by pressing the
d
d
www.nowsonic.com
ENTER
button.
ENTER
button.
ENTER
button.
ENTER
button.
ENTER
button.
Publicité
