Insignia NS-BTHDP Guide De L'utilisateur page 13

07-324 NS-BTHDP reduced.fm Page 11 Friday, August 3, 2007 1:29 PM
NS-BTHDP/NS-BTHDST
You should be able to see connected services on the My
Bluetooth Places dialog box when pairing has finished.
Pairing the headset and your mobile phone
You must pair your headset with a Bluetooth-enabled phone
before you can use it. Your Insignia Bluetooth headset can be
paired with up to eight compatible phones and other devices.
However, it can be connected to only one phone at a time.
To pair the headset and phone:
1
Make sure that the headset is off.
2
Press and hold the Multifunction button for more than
seven seconds, until short, low tones from the earpiece, and
the blue and red lights flash alternately.
3
Refer to the user guide of the phone or device to set the
device into pairing mode.
4
When the phone or device finds the headset, "NS-BTHDST"
or "NS-BTHDP" appear. Accept and confirm with the
keycode 0000 (four zeros).
www.insignia-products.com
11