Beurer MC2000 Mode D'emploi page 15

Hand switch button functions
On/off button
> Press the on/off button
The Shiatsu office chair is ready for use.
Massage areas
• The massage can be stopped at any time. To do so, press the on/off button
• The massage mechanism then returns to the start position and switches off.
The currently selected massage area is indicated by the associated LED buttons.
Full back
> Press the Full Back button
The Shiatsu massage starts up for the entire back. Total duration: 15 minutes.
The massage mechanism then returns to the start position and switches off.
Upper back
> Press the Upper Back button
The Shiatsu massage starts up for the upper back. Total duration: 15 minutes.
The massage mechanism then returns to the start position and switches off.
Lower back
> Press the Lower Back button
The Shiatsu massage starts up for the lower back. Total duration: 15 minutes.
The massage mechanism then returns to the start position and switches off.
Demo
> Press the Demo button
The demo massage programme starts up.
The programme quickly moves through all the different areas of the back. The heat function is
also switched on briefly.
The individual LED buttons on the hand switch light up to indicate when each function is in use.
Total duration: 5 minutes. Subsequently, the massage function switches off.
Heat function
The massage heads can be heated.
The heat function can only be switched on when the massage programme is running.
Heat
> Press the Heat button
The massage heads are heated.
The LED button lights up.
> Press the Heat button
The heat function is switched off. The LED button light extinguishes.
When the current massage programme is complete, the heat function automatically switches off.
again
15
.