Actiforce STEELFORCE PRO SLS 2 STEP Série Notice De Montage page 25

Functions of the Memory Master (Optional)
Memory Buttons
UP/DOWN
Press and hold these buttons to adjust height into a desired position. If you release the button the
height adjustment will stop.
Saving a preferred height position
Adjust the frame to a desired position. Press SAVE.
The display will show:
Immediately press one of the memory buttons, The display "-" will be replaced by the number of the
button you have chosen. Two seconds later the power supply will confirm the setting with a double
click sound.
Memory Buttons
Press and hold these buttons to adjust height into a preferred position. When you release the button
the height adjustment will stop. When the frame reaches the preferred position the height adjustment
will slow down and stop.
Changing displayed height
This function only changes the displayed height but not the actual height. Press SAVE once.
Ass soon as the display shows:
Press and hold DOWN until the displayed height blinkingly reappears. You can now change the value
by pressing UP or DOWN. To conclude this process simply press save.
Reset Mode
The first time you put in the plug of the power supply into the socket the height adjustment can only
be operated in the reset-mode. As long as the reset-mode is enabled, the system can only move
downward. In order to use the system normally, please follow the next steps:
 Press and hold the down-button, the system slowly moves downward.
 Please move the system to the lowest position. This position will be used as reference-point (zero-
point).
 Keep the button pressed for a moment when the system has reached the lowest position. This will
end the reset-mode.
 The system can be operated normally now. Press and hold the up- or down-button to move the
system to the desired height. The system stops when you release the buttons.
System restart—initializing the reset-mode
In order to initialize reset it is generally necessary to lower the frame to its lowest position.
 Press "down-" buttons (about 10 seconds) until the sound "click" is heard.
 Proceed with the "Reset-mode" instructions listed above.
SAVE
Save
English
UP
DOWN
25