Sonnenkonig FRESCO 140 Mode D'emploi page 56

EN
THE WIFI MODE CAN ONLY BE SET WHEN THE POWER ON INDICATOR
IS IN OFF/STANDBY MODE.
8. Enter the correct
WLAN password.
10. Select «Done» if the
connection was suc-
cessfully established. If
no connection has been
established, follow the
instructions on the app.
12. Select «...» at the top right of the operation screen and then select «Modify
Device Name» to give your device a logical name so that you know which device it is.
Your device and smartphone are now set up to be remotely controlled via WLAN.
56
9. A connection is
established between the
app and the device. If
this fails, press the WIFI
button on the device for 5
seconds to reset.
11. The operation screen
of the device appears.