Installation - MELINERA HG01082A Instructions De Montage

Risk of battery leaking
In the event of a battery leak, immediately remove it from the
device to prevent damage.
Avoid contact with the skin, eyes and mucous membranes.
In the event of contact with battery acid, thoroughly flush the
affected area with clean water and seek immediate medical
attention.
Avoid extreme environmental conditions and temperatures,
which could affect the batteries, e.g. above radiators/in
direct sunlight.
Remove the batteries from the device if they have not been
used for a long period.
Risk of property damage
Only use the specified battery type!
When inserting the battery ensure that it is inserted the right
way round! This is indicated inside the battery compartment.
If necessary, clean the battery and device contacts before
inserting the battery.
Promptly remove drained batteries from the product.

Installation

Note: You will need a screwdriver and a power drill to install the
doorbell.
Note: Only use the included screws and dowels for installation.
Installing the product (see Fig. C)
GB/IE/NI 9