AEG MC 4456 iP Mode D'emploi page 55

USB port
This device has been designed in accordance with the latest
USB state of the art technology. Due to the large variety of
different USB memory tools on the market it is not possible to
provide complete compatibility with all USB storage devices.
In some rare cases there might occur, for that reason, errors
when playing USB storage devices. That is not a malfunction
of this device.
1. Open the cover (3) on the top of the device.
2. Use the CD/iPOD/USB/CARD button (13/1) to select
USB mode. The display will show MODE.
3. Plug a USB storage directly into the port. USB READING
and then the total number of folders (F) and the number
of titles (T) are displayed.
4. If playback does not begin automatically: Please press
SCAN/ENTER (14/13) to start playback of the music
files.
Please refer to chapter "Playing CDs/MP3" for operation.
CAUTION:
Before removing the USB storage device, use DAB/FM/
AUX button to switch to RADIO mode.
SD/MMC card slot
1. Open the cover (3) on the top of the device.
2. If you wish to play files from a SD/MMC card, please
insert the card in the respective slot.
3. Now use the CD/iPOD/USB/CARD button (13/1) to se-
lect CARD mode. CARD MODE appears on the display.
CARD READING and then the total number of folders (F)
and the number of titles (T) are displayed.
4. If playback does not begin automatically: Press
SCAN/ENTER (14/13) to start playback of the music files.
Please refer to chapter "Playing CDs/MP3" for operation.
LINE IN jack
Connect analogue playback devices. When connecting to
this jack you may also listen to the audio of other devices,
such as MP3 or CD players etc., via the speakers.
1. Please connect the external device via 3.5 mm plug jack
to the LINE IN jack (23).
2. Now use DAB/FM/AUX button (12/2) to select AUX
mode. AUX MODE appears on the display.
3. Via the speakers you will listen to the audio of the exter-
nal device; use VOLUME +/- buttons (4/8) to adjust the
volume. The CD buttons are not active.
4. For further functions please refer to the user manual of
the external audio device.
NOTE:
Set the volume of the external device to a proper audible
level.
Restore factory defaults
All preset radio stations and the time are deleted.
1. Switch the device to Standby mode.
2. Hold down the /MENU/INFO button (15/13) for around
3 seconds. "SYSTEM RESET PLEASE WAIT" appears on
the display. If the reset was successful, "SYSTEM RESET
OK" appears on the display.
3. The device then searches for the time. SCAN TIME ap-
pears on the display.
Listening to the radio
Scan FM stations
1. Repeatedly press DAB/FM/AUX button (12/2) until the
display shows "RADIO INITIALIZE PLEASE WAIT".
2. You have two options for tuning a station:
- Press the / SKIP/TUNE SEARCH buttons (16/13).
- If you press the SCAN/ENTER (14/13) button, the
device scans up to the next station. Hold down this
button to scan to the previous station.
3. If the reception is too weak and there is static on the
received station, try to improve the reception by turning
and winding/unwinding the antenna. For FM stations,
you can toggle between AUDIO MODE: MONO and
AUTO (stereo) reception using the SELECT/MONO/ST
button (3 on the remote). When the reception is poor, we
recommend switching to MONO.
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
1. Press the DAB/FM/AUX button (12/2) repeatedly until
"WELCOME TO DIGITAL RADIO" appears on the
display.
2. Press the SCAN/ENTER (14/13) button to start
automatic scanning. "AUTOTUNE FULL SCAN" appears
briefly on the display. The device then searches for the
radio stations which can be received.
3. You can select the next or the previous station by using
the / SKIP/TUNE SEARCH buttons (16/13).
4. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
English
55