Publicité
Les langues disponibles
Les langues disponibles
Accessory
Notes:
AC power lead x 1
Operation with AC power
AC 230-240 V,
50 Hz
To AC INPUT
To an AC socket
Connect the AC power lead to the AC power input socket, then con-
nect the AC power lead plug to an AC socket.
Notes:
If the unit will not be used for a long period of time, remove the AC
power lead from the AC socket.
Connection of the AC power lead to the unit disconnects the batter-
ies.
Never use a power lead other than the one supplied. It may cause an
electric shock or fire.
E-2
The AC power lead is located in
the battery compartment.
Only the accessory in the draw-
ing is included.
Operation with batteries
1
Disconnect the AC power lead, and remove the battery compart-
ment cover.
2
Insert 6 "D" size batteries (UM/SUM-1, R20, HP-2 or similar) into
the battery compartment.
Insert the batteries according to the direction indicated on the rear panel.
When inserting or removing the batteries 3 and 6 , push them toward
the ë battery terminals.
Installing the batteries incorrectly may cause the unit to malfunction.
3
Replace the battery compartment cover.
Battery replacement:
Replace the batteries when they become weak and/or recording or playback is
impaired. This may occur even though radio broadcasts are audible.
Remove the battery compartment cover, and insert your finger in the hole on
the bottom of the unit to remove batteries.
Notes:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not be used for long
periods of time. This will prevent potential damage due to battery leakage.
Batteries are not included.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
2
3
1
5
6
4
Publicité
