SERGE BLANCO SB 1131 Manuel D'utilisation page 2

Instruction manual for Rugby Dual Chronograph SERGE BLANCO SB 1131
ENGLISH
A) DISPLAY
Hour hand
1st position
Normal crown
position
B) SETTING THE TIME (DUAL TIME - LEFT DIAL)
1. Pull the crown out to the 1st position, second hand stops to run.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, the second hand begins to run.
C) SETTING THE TIME (CHRONOGRAPH - RIGHT DIAL)
1. Pull the crown out to the 1st position, second hand stops to run.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, the second hand begins to run.
D) USING THE STOPWATCH (RIGHT DIAL)
This stopwatch is able to measure and display time in 1second united up to maximum of 29min 59sec.
Stopwatch will stop automatically after running continuously for 30 minutes.
MEASURING TIME WITH THE STOPWATCH
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second handsreturn to their
ZERO positions.
* Button A/B does not function during resetting the stopwatch.
RESET
STOPWATCH RESET
This procedure should be performed when the stopwatch second hand does not return to the ZERO second
position after the stopwatch has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 1st Click Position.
2. Press button "A" to set the stop watch second hand to the ZERO position.
*The stopwatch minute hand is syncronized with stopwatch second hand.
*The stop watch second hand can be advanced rapidly by continuously pressing button "A".
3. Once the hands have been zeroed, reset the time and return the crown to its normal position.
Minute hand
Stopwatch minute hand
Second hand
«A»
TIME MEASUREMENT
Hour hand
Second hand
Stopwatch second hand
Minute hand
Button A
24 hour hand
1st position
Normal crown
position
Button B
«A»
«A»
STOP
«B»