Remote Control - Cambridge Audio azur 540C V2.0 Mode D'emploi

REMOTE CONTROL

The 540C/640C V2.0 is supplied with an Azur Navigator remote
control that operates both this CD player and Cambridge Audio
Azur amplifiers. Insert the supplied AAA batteries to activate.
Standby/On
Switches the unit between On and Standby mode.
Open/Close
Opens and closes the disc tray.
Numerical Track select
Press the number of the desired track. The track will then be
played from the start of the track.
Track select
To select a track number greater than ten, press -/-- followed by
the track number.
Bright
Alters the brightness of the display backlight. There are three
levels of brightness: Bright, Normal, and Off.
Play / Stop / Pause
Press the relevant button to play, stop or pause the CD.
Skip
Right Skip - press once to skip forward by one track on the CD.
Press and hold to skip forwards through tracks.
Left Skip - press once to skip backward by one track on the CD.
Press and hold to skip backwards through tracks.
8 Azur compact disc player
Search
Press and hold to search within the selected track. Right button to
fast forward, left button to rewind.
Program, Remain, A-B B , Repeat, Intro, Random, Space
Read the 'Operating Instructions' section of this manual for
information on the functions of these buttons.
Please note that the following buttons will only operate a
Prog
matching Cambridge Audio Azur amplifier:
Remain
Volume
Increase or decrease the volume of the amplifier output.
Vol
Mute
Mutes the audio on the amplifier. The Mute mode is indicated by
Vol
the channel LED flashing. Press again to cancel mute.
Aux, CD, Tuner DAB, DVD, AV MD, Tape Mon
A - B Repeat
The six source select buttons are used to change the input source
to the amplifier.
Intro Random Space
Tuner
Aux CD
DAB
AV Tape
DVD
MD Mon