Removal And Disposal - oventrop 1344596 Notice D'utilisation

Removal and disposal

Illustr. 9: Earthing of the door
(1) Central earthing point
(2) Earthing point of the door
Accessories for earthing of the port are
supplied with the flush-mounted cabinet.
Earthing of the dwelling station "Regudis
W-HTE" and its accessories is carried out via
the earthing of the cabinet.
1 2 3 4
Illustr. 10: Configuration of the central earthing point
(1)
Hexagon nut M5
(2) Lock washer
(3) Washer
(4)
Ring terminal
(5)
Washer
(6) Contact disc with cutting teeth
20
1 2
5 6
1. Connect the central earthing point (see Illustr. 9 auf
Seite 20 (1)) to the equipotential bonding rail of
the building via a cable.
The central earthing point is located on the
right-hand side wall of the flush-mounted
cabinet (see Illustr. 9 auf Seite 20).
2. Connect the earthing point of the door (see Illustr. 9
auf Seite 20 (2)) to the central earthing point (1).
Illustr. 11: Central earthing point with connection to
the equipotential bonding rail of the building
and to the door of the flush-mounted cabinet
7. Removal and disposal
NOTICE
Risk of environmental pollution!
Incorrect disposal (for instance with the
standard waste) may lead to environmental
damage.
f Dispose of the packing material in an
environmentally friendly manner.
f Dispose of the components professionally.
If no return or disposal agreement has been made,
dispose of the product.
f If possible, recycle the components.
f Dispose of components, which cannot be recycled,
according to the local regulations. Disposal with the
standard waste is inadmissible.
Flush-mounted cabinet
134459780-V04.04.2019