Velleman RCQC2 Mode D'emploi page 8

7.2 Before Take-Off
1. Operate in a spacious indoor room or outdoors without rain, snow or
wind. Make sure to limit the number of people, animals and obstacles
in your flight area.
2. Make sure both the remote control and quadcopter are correctly and
sufficiently powered.
3. Switch on the quadcopter: it should flash slowly and constantly. Place
it on a flat surface and step away a few metres.
4. Pull the throttle stick to its lowest position and switch on the remote.
The quadcopter will flash rapidly and beep, meaning it is linked to the
remote.
5. Your quadcopter is now ready for take-off.
8. Flying your Quadcopter
8.1 Basic Manoeuvres
Ascending/descending flight
Move the left
throttle stick up
and down to fly
the quadcopter
upward and
downward.
Turning
Move the left
throttle stick to
the left and right
to turn the
quadcopter left
and right.
V. 01 – 04/03/2016
RCQC2
8 ©Velleman nv