Publicité
ensure a good seal.
4
• (
13) Tighten screws evenly to avoid twisting the socket. Follow order shown.
4
• (
14) In the instance that wall battens do not exist behind the socket cut out, use flat
nuts to secure screws in place.
4
• (
15) When removing sealant from around the socket when installed, also clean the
grooves to ensure protection and smooth use of socket.
Helpful Hints
• If the cover does not move freely when installed, remove it and ensure guide rails are free
from sealant and debris.
• If your socket appears to be twisted when installed, slightly adjust the sealing screws.
Fittings Installation
• Ensure your vehicle is isolated from any power source before
commencing work.
• All fittings installations are to be carried out by a competent person
as defined by BS7671 Part 2/IEC 60364.
Operation
4
(
19-22 ) or (
• (Figure 4.) All socket lids must remain closed when not in use. In adverse
weather conditions, for example, snow, frost or heavy rain, please note risk of
electrocution exists.
4
4
(
18 ) or (
23a/23b) or (
4
4
24 - 2 8 ) or (
Figure 3.
4
29-32) or (
4
33) or (
36-40)
-4-
4
34-35)
Figure 4.
Publicité
