Start-Up - ADE HM 1800-1 Mode D'emploi

Start-up

Filling with water
1. If necessary: Disconnect the device from the
mains.
2. Hold the lower part of the humidifier and turn
the upper part of the device counter-clockwise
until loose and remove it.
3. Fill the lower part of the humidifier with
clean, cold drinking water. Do not overfill the
tank and observe the MAX mark. Capacity:
approx. 160 ml.
4. Replace the upper part of the device and turn
it clockwise as far as it will go.
Making the electrical connection
1. Insert the small plug end (mini-USB) of the USB
connection cable into the connection socket
of the humidifier.
32
USB Humidifier HM 1800-1 | 1800-2