Panasonic TY-FB7HM Mode D'emploi page 6

Safety Precautions ( be sure to observe )
WARNING
•
Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
•
If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the power
cord plug from the supply outlet.
Switch off the plasma display and unplug the power cord plug from the supply outlet.
To avoid fire or shock, do not leave the power of the display turned on.
•
To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet.
•
Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the power of the display off and
unplug the power cord plug from the supply outlet.
Handling Cautions
Do not touch the connector contacts.
•
To avoid electrostatic damage to internal parts, touch a large metallic object such as a steel cabinet to
discharge yourself before handling this product.
• Be sure to use approved HDMI connection cables.
To avoid malfunction or failure, do not use parts other than those recommended.
Accessories
Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label ( 1 sheet )
( Affix this label to the rear panel of the display. )
Slot cover
[ To install this Terminal Board, remove an
existing dual size Terminal Board and fit it
into the now blank slot. ]
6
IN
Terminal board replacement
Instructions
Screw × 4