Honda Power Products TILLER F506 Manuel De L'utilisateur page 18

2.Transmission oil
Place the tiller on a level surface and remove the oil filler cap.
The oil should be level with the lower edge of the oil filler hole.
Add oil same as the engine oil (see page 14) if the level is low.
TRANSMISSION OIL FILLER CAP
OIL FILLER HOLE
3.Air cleaner
Check the air cleaner element to be sure it is clean and in good
condition. Clean or replace the element if necessary (see page 35).
ELEMENTS
LOWER EDGE OF THE
UPPER LIMIT
OIL FILLER HOLE
15