Bissell TOTAL FLOORS 63X4 Série Guide De L'utilisateur page 13

Maintenance & Care
Cleaning the post-motor filter
The post-motor filter assists in the filtration
process to return clean air to the room.
1. Turn vacuum OFF (
from electrical outlet.
2. Remove the filter door (located on the back of
the vacuum) by pushing on the tab on the filter
door and pull out toward you.
3.
Remove the post-motor filter by grasping the lip
of the filter frame and pulling out toward you.
Check for dust and debris and replace if dirty
4.
Replace the filter door by inserting the two tabs
on the side of the filter door into the slots of the
vacuum door opening and pushing into place.
Be sure the tab on the outside of the filter door
snaps into place.
WARNING:
Do not operate cleaner with
damp or wet filters or without
all filters in place.
w w w . b i s s e l l . c a
). Unplug the vacuum
2.
Post-Motor Filter
1 - 8 0 0 - 2 6 3 - 2 5 3 5
13