Réglage Des Données De L'option Hotel - Samsung 670 Manuel D'installation

Accès : Appuyez dans l'ordre sur les boutons
mode Hospitality.)
Pour quitter ce menu : éteignez l'appareil, puis rallumez-le.
No
Category
1 Hospitality Mode
2 SI Vendor
3 Power On
4 Channel
EU_Install Guide_FRA.indd 29
Réglage des données de l'option Hotel
→ 1 → 1 → 9 → ENTERE. (Le mode Standalone [Autonome] est défini à partir du
MUTE
Hotel TV Function
Item initial value
Hospitality Mode Standalone
SI Vendor OFF
Power On Channel Last Saved
Power On Channel Num ...
Power On Channel Type ...
Power On Volume Last Saved
Power On Volume Num ...
Min Volume 0
Max Volume 100
Power On Source TV
Power On Option Last Option
Channel Setup ...
Channel Editor ...
Mixed Channel Map ON
Dynamic SI OFF
Description
• Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung /2M/ Locatel / VDA / VDA-S / Acentic /
Sutrinerelone mode : OFF /Movielink/Swisscom/ Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
• Select channel band : ATV (analog air band), DTV (digital air band),
CATV(analog cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power
On Volume Number below.
• Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
The TV turns on with this Volume Level.
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
The maximum Volume Level the user can set.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual Tuning,
Antenna setting, etc.
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without your having to display
each channel directly.
• This Feature enables showing/browsing all antenna type (Air/Cable or
Satellite) channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespec-
tive of the selected antenna type. The Channel list will also populate Air
as well Cable type channels.
• Off: When OFF, guest can access the Channel Map corresponding to
the selected antenna type [AIR/CABLE or Satellite] only. The Channel
list/Editor will only show the selected antenna type channels.
• On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
• Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme number
update is not supported)
29
Français
2014-04-14 11:18:07