White&Brown Mr.Pop's Mode D'emploi page 10

BEFORE ThE 1
ST
FROM ThE APPLIANcE.
Note: unpleasant smell or temporary smoke can occur during initial use.
-Put transparent cover/bowl (3) on the base.
- Add about 80 grams of corn into the non-stick frying plate through the vent/introduction
corn.
You can open the transparent cover/bowl if the corn is too large to pass through the hole.
- Plug the appliance.
- Press switch button to I position. Stirring rod begins to rotate, the corn starts heating.
Attention: Do not place the lid onto transparent cover/bowl when heating
in order to let vapor goes out.
With 3-5 minutes, the corn will begin to be popped gradually. The process will last about
3-9 minutes; it varies according to corn volume.
When corn doesn't popped any more, switch off the appliance.
USE, REMOVE ALL PAcKAGING AND PROTEcTIONS
To serve pop corn :
Hold firmly de Mr. Pop's and place the body upside down
in order to put pop corn into the transparent cover/bowl.
Take out the base. Raise up the bowl and put the lid below
(in order to serve as a crumb tray).
Add some salt or sugar, the corn will be more sweet and
delicious.
Note : Keep the product 15-20 minutes out of working in
order to cool it before next use.
uSING
10