Example Of Connection - Horotec MSA19.875 Mode D'emploi

CONNECTING A COMPRESSOR TO THE DEVICE
To connect a compressor to the device, use 1 hose Ø 6 mm as follows :
- Connect the hose Ø 6 mm into the connector no. 4 of the device
- Connect the other end to the compressor.
Maximum pressure input : 6 bar.

3. EXAMPLE OF CONNECTION

(4)
Compressor
MSA19.455
6 bar
Vacuum system
MSA19.875
(4)
11 bar
T fitting
Waterproof tester
MSA19.183
± 2 bar
Blower
MSA19.817
P. 2/2
MSA19.875